Warren G Had to Regulate Too Iron-On Patch

High quality iron-on embroidered patch for backpacks, bags, hats, and more. Advocacy meets retro aesthetic. 

Style: Embroidered Rounded Corner Square Iron-on Patch
Color: Red, Orange, Yellow, Blue, Cream, Navy
Size: 2.25" x 2.25"

Directions for patch application with iron:

1. Choose a clean, smooth flat surface location for your patch.
2. Use a dry iron on the highest setting (no steam) or a heat press to apply the patch where desired.
3. Cover patch with a thin fabric to protect the embroidery of the patch from being damaged due to the iron/heat.
4. Press firmly on top of the patch for 15 seconds, then continue to iron over the patch, moving the iron around to ensure all edges and parts of the patch have the chance to adhere, for about 3 minutes.
5. Flip the garment/item over, and iron directly over the back of the patch for 3 more minutes, continuing to move the iron around to cover all parts of the patch.
6. Allow the patch to completely cool
7. To check the seal, try to gently peel up an edge. If you need to, repeat the steps above over the problematic areas and then allow to fully cool again before testing.

Directions for patch application with heat press:

1. Heat press to 305 degrees
2. Press patch on to item with firm pressure for about 20 seconds
3. If possible, turn item inside-out and press the back side for 10 seconds with firm pressure.
4. Allow to cool completely and check seal. If necessary, repeats steps above.